Easy Pennant Banner

One of the easiest decorations that is in my holiday arsenal is the pennant banner. I use them for holidays, birthday parties, wedding and baby showers and more – I’ve got a lot sitting in my closet. And I think I’ve used just about every material to make them: Wood, paper and fabric. Wood is heavy and hard to hang. Paper is the easiest – but buying cute scrapbooking paper isn’t always cheap. Fabric is my favorite because of the durability – but its also the most time consuming because you have to finish edges (unless you’re going with burlap and frayed edges is expected.)

But here’s my secret weapon- use oilcloth fabric and you don’t have to finish the edges and they don’t fray. You get the best of both worlds. Here’s a decoration you can hammer out in 20 mins.

Buy some festive oilcloth – think washable tablecloth material. I’ve seen some fabric stores with great selection but it’s hit or miss. I usually buy oil-cloth online – even then selection is not near what it is for fabric.

Cut strips of fabric (mine were 6″) and then cut out the shapes of your choice. Triangles are always a safe route. Squares are fun. Sometimes I mix it up like I did for this patriotic banner and mix shapes.

The next secret weapon to make this project a breeze: extra wide double fold bias tape. It’s double fold which means all the edges are finished.I like to lay the tape out and line them all up so I can adjust what needs to be adjusted. Then slip your fabric in the tape and sew from one edge of the tape to the other. I’ve done enough of these that I usually pin the first flag and eyeball the rest.

You’re done. I wasn’t kidding about this being a 20 min project. 15 minutes of cutting. 5 minutes of sewing. It took me longer to get a step stool and hang it than it did to make it.
I had some scraps and made a miniature pennant for our chalkboard. I didn’t have extra bias tape so I ran the sewing machine from one piece of fabric to the other with a half inch gap and it worked great.